Auto-reset Solenoids
More...
VMR12OTN - Auto Reset Solenoid Gas Valve (1/2″)
-
1/2″ pilot valve rectified auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1/2″ pilot valve rectified VMR12OTN auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR12 - Auto Reset Solenoid Gas Valve (1/2″)
-
1/2″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1/2″ VMR12 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR22 - Auto Reset Solenoid Gas Valve (3/4″)
-
3/4″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 3/4″ VMR22 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR32 - Auto Reset Solenoid Gas Valve (1″)
-
1″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1″ VMR32 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR352 - Auto Reset Solenoid Gas Valve (1 1/4″)
-
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1 1/4″ VMR352 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR42 - Auto Reset Solenoid Gas Valve (1 1/2″)
-
1 1/2″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1 1/2″ VMR42 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR62 - Auto Reset Solenoid Gas Valve (2″)
-
2″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 2″ VMR62 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR72 - Auto Reset Solenoid Gas Valve (2 1/2″)
-
2 1/2″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 2 1/2″ VMR72 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR82 - Auto Reset Solenoid Gas Valve (3″)
-
3″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 3″ VMR82 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR92 - Auto Reset Solenoid Gas Valve (4″)
-
4″ auto-reset 230V solenoid valve.
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 4″ VMR92 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR93 - Auto Reset Solenoid Gas Valve (5″)
-
5″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Certified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 5″ VMR93 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
VMR952 - Auto Reset Solenoid Gas Valve (6″)
-
6″ auto-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass model). Others gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (from 3/4″ to 6″).
-
Fine mesh filter incorporated prevents dirty contamination of the seal seat.
-
Maximum operating pressure 200 mbar or 360 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Easy adjustable flow rate, provided of locking screw (except 4″, 5″, 6″ and brass models).
-
Qualified for continuous service (100% ED) and endless ON/OFF cycles.
-
Coil insulation is class H (180°C).
-
Terminal box with PG connector or ISO 4400 plug on 1/2″.
-
The large models are provided with a power saving electronic device, to reduce power consumption and working temperature.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 6″ VMR952 auto reset valve is a fast opening single-stage solenoid valve, normally closed. This type of device is suitable for air or gas blocking and releasing controls, required in gas power burners, atmospheric gas boilers, furnaces and other gas consuming appliances. The VMR type valves are made in accordance with EN161 standard.
