Manual-reset Solenoids
More...
EVRM12 - Manual Reset Solenoid Gas Valve (1/2″)
-
1/2″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1/2″ EVRM12 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM22 - Manual Reset Solenoid Gas Valve (3/4″)
-
3/4″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 3/4″ EVRM22 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM32 - Manual Reset Solenoid Gas Valve (1″)
-
1″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1″ EVRM32 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM35 - Manual Reset Solenoid Gas Valve (1 1/4″)
-
1 1/4″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1 1/4″ EVRM35 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM42 - Manual Reset Solenoid Gas Valve (1 1/2″)
-
1 1/2″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 1 1/2″ EVRM42 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM62 - Manual Reset Solenoid Gas Valve (2″)
-
2″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 2″ EVRM62 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM72 - Manual Reset Solenoid Gas Valve (2 1/2″)
-
2 1/2″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 2 1/2″ EVRM72 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM82 - Manual Reset Solenoid Gas Valve (3″)
-
3″ manual-reset 230V solenoid valveProvided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 3″ EVRM82 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM92 - Manual Reset Solenoid Gas Valve (4″)
-
4″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 4″ EVRM92 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM93 - Manual Reset Solenoid Gas Valve (5″)
-
5″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 5″ EVRM93 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
EVRM95 - Manual Reset Solenoid Gas Valve (6″)
-
6″ manual-reset 230V solenoid valve
-
Provided with G1/4” pressure gauge on two sides in the inlet pressure chamber (except brass models). Other gauge points on request.
-
Optional G1/8” connection for closed position indicator micro switch (on request from ¾” to 6”).
-
Fine mesh filter incorporated to prevent dirty contamination of the seal (except brass models).
-
Maximum operating pressure 500 mbar.
-
Suitable for air and non-aggressive gases (EN 437, 1, 2 and 3 families).
-
Coil insulation is class H (180? C).
-
Terminals with DIN 43650 plug and PG connector.
-
Valves are 100% tested by computerized testing machineries and are fully warranted.
Click here for more information
This 6″ EVRM95 valve is a manual reset safety valve that is normally closed. This type of device, connected with one or more pressure switches is suitable for locking operations upon gas, air or electric current failure. The EVRM-NC type valves are made in accordance with EN161 standard (when applicable).
